Makita Cordless SDS Max Drill Breaker

This Makita Cordless SDS Max Drill / Breaker has all the power of an electric machine in a more portable unit.

It uses two 18 v LXT batteries and the brushless motor gives 36 v of power.

This machine will punch a 40mm hole into concrete, will run up to 500rpm and will generate up to 2,900 blows per minute with 8.0 Joules of impact energy.

As with all of Makita’s breakers and hammer, the AVT gives this machine a drilling vibration rating – when hammer drilling into concrete – of just 5.0m/s².

This is a durable 2-mode machine which has rotary drilling with hammer action and hammer action-only for chiselling. The easy-to-operate mode change switch is positioned conveniently on top of the motor body ahead of the vibration-reducing rear grip handle.

As the variable speed is controlled by the grip trigger, a constant speed control can be set for constant running when chiselling. This machine can also be used with the trigger controlling chiselling for intermittent work.

The bit angle can also be set as required by using the mode control.

This machine also has the Soft Start feature which accelerates the motor into action even if the trigger is pulled fully home from off.

In drilling mode this reduces the sudden torque load on start up. When operating, the torque limiter connected to the side handle will cut the motor drive should the drill bit snag thus providing further operator protection. The soft no load function automatically cuts the motor speed during idling to reduce vibration generation which contributes to this hard-working Makita rotary hammer. An electric brake and useful LED job light are also featured.

For more information download the user instruction guide here.