The RIDGID® 258XL power pipe cutter offers 8" (200 mm) to 12" (300 mm) diameter pipe cutting capacity. Powered by the 700 Power Drive, the 258XL is a displacement cutter that provides square cuts. The operator controls the feeding rate by pumping the hydraulic foot pump throughout the operation. A square cut with minimal burr on either 21ft (6m) or nipple lengths of pipe is achieved quickly** without abrasive dust, sparks, or open flame. Now one person can easily square cut 12" schedule 40 pipe in minutes. Also, the RIDGID Pipe Roller for beveling can be used to rotate the pipe while second operator uses a grinder to bevel the pipe.
Features
- Electric pipe cutter model 258XL With the RIDGID®258XL can cut pipes from 8" (200 mm) to 12" (300 mm) in diameter
- The 258XL powered by the RIDGID®700 with electric drive (optional), is a pipe cutter according to the displacement principle that produces angled cuts
- The operator controls the cutting speed by pumping the hydraulic foot pump during operation
- A right angle cut with minimal burr at 21 ft (6 m) or nipple length of pipe is quickly achieved without grinding dust, sparks or open flames
- Now one person can easily cut a 12" pipe with a wall thickness of 0.4" (10 mm) at right angles in a few minutes
- In addition, the RIDGID pipe chamfer support can be used to turn the pipe while a second person uses a grinder to chamfer the pipe
Benefits
- Angled cutting of 21 ft (6 m) or nipple lengths of pipe without effort
- Cuts effortlessly as pipe material is displaced rather than removed
- No grinding dust, dangerous sparks, or open flame
- Cuts steel pipe quickly with minimal burr formation
- Ideal for cutting pipe for connection with groove seams
| Specifications | |
| Cutting capacity | 200 mm (8") to 300 mm (12") |
| Electric drive | NOT included |
| Speed | 26-30 rpm (no load) |
| Weight | 66 kg |
