Rebar Bender / Cutter

Rebar is tough stuff, yet despite its strength, it is easy work for the Multi Volt muscle of the VB36 16 DA.

To cut, users simply set the dial to the ‘Cut’ option, position the tool, open the cover, set the rebar on the lower cutter and pull the switch trigger.

The tool will give you a super smooth clean cut of the rebar.

You can even ‘double up’ and cut 2 x 10mm rebar at the same time, such is the power of the tool.

The VB36 16 DA can also bend rebar as if it was made of rubber.

Set the angle of the bend with a quick turn of the dial and finely adjust the tool with the variable speed switch trigger.

You don’t even need to do one at a time – the VB36 16 DA can accurately bend multiple pieces of rebar together (2 x 13mm rebar and 3 x 10mm).

With no cord to get in the way of the operator, the VB36 16 DA can powerfully cut and easily bend rebar anywhere, without the need for mains power.

That means it can be used on building sites which are increasingly moving to 100 per cent cordless tools

With the ability to cut and bend 10mm, 13mm and 16mm rebar, you'll have the freedom to work from anywhere.

With the turn of a pre-set dial, bends can be made in a variety of angles.

A Variable Speed Switch Trigger allows manual adjustment of the rebar angle based on your visual estimation.

The Reverse Rotation Mode reverses the bending roller, making it easy to remove bent rebars or check bending angles.

Applications:

1. Cutting of Rebar
2. Bending of Rebar

Features:

• Cutting and Bending In One Unit
• Excellent Cutting and Bending Performance
• Reverse Rotation Mode For Precision Angle Alignment
• Variable Speed Trigger Allows Manual Adjustment Of The Rebar Angle Based On Your Visual Estimation
• Controller To Prevent Interruption Of Bending/Cutting Operation
• 4 Angle Settings From 45° To 180°
• Brushless DC Motor